IN DEVELOPMENT
MIPEX 1S [CO₂] is a compact infrared sensor developed for accurate carbon dioxide detection in portable and battery-operated gas detectors. With ultra-low power consumption of less than 0.2 mW and compact dimensions, it enables long-term autonomous operation in industrial and environmental monitoring devices.
MIPEX 1S [CO₂] is a compact infrared sensor for measuring carbon dioxide in small, battery-powered gas detectors. It uses NDIR technology and consumes very little power — less than 0.2 mW — making it perfect for portable devices that need to work for years without charging.
It works with power supplies from 2.7 V to 5.0 V, and provides stable, accurate measurements even in tough conditions like changing temperature or high humidity.
ADVANTAGES:
| Parameter | Value | |
| General specification | ||
| Gas sampling method: | Diffusion | |
| Operating principle: | NDIR | |
| Sensor type | CO₂ | |
| Relative humidity | up to 98% (without condensation) | |
| Atmospheric pressure, kPa | 80…120 | |
| Temperature, °C | -55...+60 | |
| Warm-up time, sec | ≤ 120 | |
| Life Time | ≥ 10 | |
| Housing material | Polycarbonate Lexan™ | |
| Overall dimensions, mm | 19.9×19.9×10 | |
| Weight, g | 10.5 | |
| Measurement specification | ||
| Measurement range, % vol. | 0…5 % vol. | |
| Variability (+20…+25 ⁰C) | ± 0.05% vol. or ± 5% of readings (whichever is greater) | |
| Response time (T90) | Without dust filter: 15 sec With dust filter: 30 sec | |
| Electrical specification | ||
| Operating supply voltage, VDC | +2.7…+5.0 | |
| Maximum supply voltage, VDC | +5.4 | |
| Communication interface | UART | |
| Average current, µA | 65 max | |
| Peak current, mA | 2 max | |
| Sensor is designed in compliance with: | IEC 60079-0, IEC 60079-11 EN IEC 60079-0 / EN 60079-11 UL913, CAN/CSA-C22.2 No. 157-92 |
