IN DEVELOPMENT
MIPEX 1F is a ready-to-integrate optical gas sensor for stationary systems, designed for continuous methane monitoring in explosive atmospheres using diffusion sampling and certified intrinsically safe design.
Features
The MIPEX 1F is a high-precision optical sensor for continuous methane (CH₄) monitoring in stationary gas detection systems.
It operates via diffusion, ensuring accurate measurements in explosive atmospheres and harsh environmental conditions.
An optional optical heating system prevents condensation on critical surfaces, enabling stable performance even in high humidity and low temperatures.
ADVANTAGES:
| Parameter | Value | |
| General specification | ||
| Gas sampling method: | Diffusion | |
| Operating principle: | NDIR | |
| Calibration gas | CH₄ | |
| Relative humidity | up to 98%(without condensation) | |
| Atmospheric pressure, kPa | 80…120 | |
| Temperature, °C | -60...+75 | |
| Warm-up time, sec | ≤ 120 | |
| Housing material | Stainless steel | |
| Overall dimensions, mm | Ø51x82 | |
| Weight, g | 400 | |
| Measurement specification | ||
| Measurement range, % vol. | 0…5 0…100 | |
| Variability (+20…+25 ⁰C) | ± 0.1% vol. or ± 5% of readings (whichever is greater) | |
| Response time t(90), sec | ≤ 10 | |
| Electrical specification | ||
| Operating supply voltage, VDC | +3.0…+5.0 | |
| Maximum supply voltage, VDC | +5.0 | |
| Communication interface | UART (optional: RS-485 (MODBUS) | |
| Average current, µA | 600 max under normal conditions | |
| Average current consumption of optical system heating, µA | 20 max | |
| Peak current, µA | 5 max |
